|
|
Q&A
May 28, 2017 19:50:04 GMT -5
Post by gacsa2000 on May 28, 2017 19:50:04 GMT -5
Do yuo have an example for the canario's interface?
|
|
|
|
Q&A
May 29, 2017 4:43:24 GMT -5
via mobile
Post by Admin on May 29, 2017 4:43:24 GMT -5
Do yuo have an example for the canario's interface? Once you connect to a C-nario Universal Player, you would see the interface. There isn't much difference visually, it's just that the buttons are created automatically based on the devices that are available from the Player. |
|
|
|
Q&A
Sept 23, 2017 8:13:05 GMT -5
via mobile
Post by DCL on Sept 23, 2017 8:13:05 GMT -5
Please post all of your questions regarding the application in this thread, we will try our best to answer promptly Can u add command line in the end of Button maybe 5 ascii command line, u can set off in the setting, when someone need ,they Can enable it. Thanks |
|
|
|
Q&A
Sept 25, 2017 9:44:43 GMT -5
Post by Admin on Sept 25, 2017 9:44:43 GMT -5
Please post all of your questions regarding the application in this thread, we will try our best to answer promptly Can u add command line in the end of Button maybe 5 ascii command line, u can set off in the setting, when someone need ,they Can enable it. Thanks Hi @dcl, What do you mean by adding a command line? Can you provide more details? Ido |
|
|
|
Q&A
Nov 13, 2017 21:24:28 GMT -5
Post by Ha Hoang on Nov 13, 2017 21:24:28 GMT -5
I meet a problem with UDP TCP Server Paid now:
Last time I use this app on Galaxy S4, Glaxy Note 10.1 and Galaxy Note 8 and it work very well. Now I change my phone to Galaxy Note 5 with lastest firmware (Android 7.0, Kernel 3.10.61-11762721, Android security patch level October 1,2017) and install UDP TCP Server Paid on it.
But now it can not run: It hang on (can not do any thing) and also can not exit (i have to close it by system close application).
I have check all setup of my Galaxy Note 5 nut there are all normaly.
So pls. help me to resolve this problem.
Thanks.
|
|
|
|
Q&A
Nov 15, 2017 13:30:57 GMT -5
Post by Admin on Nov 15, 2017 13:30:57 GMT -5
I meet a problem with UDP TCP Server Paid now: Last time I use this app on Galaxy S4, Glaxy Note 10.1 and Galaxy Note 8 and it work very well. Now I change my phone to Galaxy Note 5 with lastest firmware (Android 7.0, Kernel 3.10.61-11762721, Android security patch level October 1,2017) and install UDP TCP Server Paid on it. But now it can not run: It hang on (can not do any thing) and also can not exit (i have to close it by system close application). I have check all setup of my Galaxy Note 5 nut there are all normaly. So pls. help me to resolve this problem. Thanks. Hello @gacsa2000may I am sorry to hear that the application is not running for you, are you sure you are running the latest version? I do not have a Note 5 to test with, but I do have a Galaxy S8 with Android version 7.0 with security patch October 1, 2017 and everything is working just fine. When you say it is "stuck" is that on the "checking license..." screen? If so, you should let the application run at least once while connected to the internet and only then you'll be able to run the application. If the screen is "stuck" on something else, can you please send me a picture of that screen? Can you make sure that you "enable" the permission to use local storage for the application (app manager -> select the app -> permissions -> enable that permission)? Can you try clearing the data for the application? Lastly, make sure that the folder named UDPTCPServer is empty on your internal storage of your device (all of your templates are stored there, so create a backup of those files if you created any custom templates). Let me know if you are still having an issue after those steps. Ido |
|
|
|
Q&A
Nov 15, 2017 21:34:28 GMT -5
Post by hahoang67 on Nov 15, 2017 21:34:28 GMT -5
I meet a problem with UDP TCP Server Paid now: Last time I use this app on Galaxy S4, Glaxy Note 10.1 and Galaxy Note 8 and it work very well. Now I change my phone to Galaxy Note 5 with lastest firmware (Android 7.0, Kernel 3.10.61-11762721, Android security patch level October 1,2017) and install UDP TCP Server Paid on it. But now it can not run: It hang on (can not do any thing) and also can not exit (i have to close it by system close application). I have check all setup of my Galaxy Note 5 nut there are all normaly. So pls. help me to resolve this problem. Thanks. Hello @gacsa2000may I am sorry to hear that the application is not running for you, are you sure you are running the latest version? I do not have a Note 5 to test with, but I do have a Galaxy S8 with Android version 7.0 with security patch October 1, 2017 and everything is working just fine. When you say it is "stuck" is that on the "checking license..." screen? If so, you should let the application run at least once while connected to the internet and only then you'll be able to run the application. If the screen is "stuck" on something else, can you please send me a picture of that screen? Can you make sure that you "enable" the permission to use local storage for the application (app manager -> select the app -> permissions -> enable that permission)? Can you try clearing the data for the application? Lastly, make sure that the folder named UDPTCPServer is empty on your internal storage of your device (all of your templates are stored there, so create a backup of those files if you created any custom templates). Let me know if you are still having an issue after those steps. Ido Dear Admin, I have check all thing as your advise but nothing change. this app start ok (it seem to check license ok), I can load any my template, setup, etc,... But when I press a button then app stop and I can not do any thing then, even exit from it. I have some image of screen capture but I dont know how to send to you. Waiting from your reply soon. Thanks. |
|
|
|
Q&A
Nov 16, 2017 9:17:49 GMT -5
Post by Admin on Nov 16, 2017 9:17:49 GMT -5
Hello @gacsa2000may I am sorry to hear that the application is not running for you, are you sure you are running the latest version? I do not have a Note 5 to test with, but I do have a Galaxy S8 with Android version 7.0 with security patch October 1, 2017 and everything is working just fine. When you say it is "stuck" is that on the "checking license..." screen? If so, you should let the application run at least once while connected to the internet and only then you'll be able to run the application. If the screen is "stuck" on something else, can you please send me a picture of that screen? Can you make sure that you "enable" the permission to use local storage for the application (app manager -> select the app -> permissions -> enable that permission)? Can you try clearing the data for the application? Lastly, make sure that the folder named UDPTCPServer is empty on your internal storage of your device (all of your templates are stored there, so create a backup of those files if you created any custom templates). Let me know if you are still having an issue after those steps. Ido Dear Admin, I have check all thing as your advise but nothing change. this app start ok (it seem to check license ok), I can load any my template, setup, etc,... But when I press a button then app stop and I can not do any thing then, even exit from it. I have some image of screen capture but I dont know how to send to you. Waiting from your reply soon. Thanks. I suggest to move this support thread to be done via e-mail, so you'll be able to send me the pictures, please also send me the templates you are loading and such (I'd like to understand what kind of communication you are doing). Is it possible that you are trying to send a TCP command but there is no device on the other side listening on that port and you are just seeing the wait time (which will elapse after 30 seconds or so)? In any case, my e-mail is aviramido.development@gmail.com Thanks |
|
|
|
Q&A
Nov 17, 2017 0:20:10 GMT -5
Post by hahoang67 on Nov 17, 2017 0:20:10 GMT -5
Dear Admin, I have check all thing as your advise but nothing change. this app start ok (it seem to check license ok), I can load any my template, setup, etc,... But when I press a button then app stop and I can not do any thing then, even exit from it. I have some image of screen capture but I dont know how to send to you. Waiting from your reply soon. Thanks. I suggest to move this support thread to be done via e-mail, so you'll be able to send me the pictures, please also send me the templates you are loading and such (I'd like to understand what kind of communication you are doing). Is it possible that you are trying to send a TCP command but there is no device on the other side listening on that port and you are just seeing the wait time (which will elapse after 30 seconds or so)? In any case, my e-mail is aviramido.development@gmail.com Thanks Thank you, I have sent an email to you with capture image. |
|
wsystem
New Member
Posts: 1
Likes: 0
|
Q&A
Dec 7, 2018 8:09:05 GMT -5
Post by wsystem on Dec 7, 2018 8:09:05 GMT -5
Hello,
Great software, thank you for your good works.
I would like to control few devices on the same interface. For example :
Button A : IP xxx.xxx.xxx.xxx - Command xxxx
Button B : IP yyy.yyy.yyy.yyy - Command yyy
Do you expect this feature ?
I know that I can use the template but this is not so direct.
Else, a preset on button to call the template ?
is there a way to translate the app ?
BR
Bernard from France
|
|
|
|
Q&A
Feb 25, 2019 11:27:06 GMT -5
Post by HDD03 on Feb 25, 2019 11:27:06 GMT -5
Hi. I want to ask a question how to make the application to save the settings of the button automatically in the function (Phil Green) ?
Problem when you select other saved buttons, the initial settings are restored.
|
|
|
|
Q&A
Mar 8, 2019 15:57:07 GMT -5
Post by Admin on Mar 8, 2019 15:57:07 GMT -5
Hi. I want to ask a question how to make the application to save the settings of the button automatically in the function (Phil Green) ? Problem when you select other saved buttons, the initial settings are restored. Hello, You can save the changed settings into a template and load that afterwards, have you tried that? |
|
|
|
Q&A
Jun 4, 2019 12:43:12 GMT -5
Post by lvguest on Jun 4, 2019 12:43:12 GMT -5
Hi, I am using a gprs/umts module and want to send tcp packets to this app. But for this I need
that it uses the celular networks instead of the wifi. Is this possible?
|
|
|
|
Q&A
Jun 24, 2019 8:53:49 GMT -5
Post by Admin on Jun 24, 2019 8:53:49 GMT -5
Hi, I am using a gprs/umts module and want to send tcp packets to this app. But for this I need that it uses the celular networks instead of the wifi. Is this possible? Hello, I apologize for the delayed response. Unfortunately, it is not possible to receive packets via the cellular network, as the cellular network does not allow that, you can go ahead and send out to the internet, but not receive. Thank you for using my app! |
|
